Top 7 Cargo Trailer Manufacturers in Canada

I’ve worked with dozens of buyers over the years—fleet managers, contractors, even solo drivers. Many of them ask the same thing: “Who makes the best trailers in Canada?”

I never answer that with just one name.

Because it depends. Some need heavy-duty builds for equipment. Others want enclosed trailers for retail deliveries. Different jobs call for different makers.

But I’ve seen the patterns. I’ve watched which trailers break down, and which keep rolling strong year after year.

This article is built on that real-world experience. I’m going to walk you through the 7 top cargo trailer manufacturers in Canada right now. Each one offers something different. Some are great for construction. Others are better for food or logistics.

By the time you finish, you’ll know where to look—and how to choose what’s right for you.

Let’s start!

Comparison Table

Before we get into the full details of each manufacturer, here’s a quick snapshot of how they stack up. This table gives you a clear side-by-side view of their locations, specialties, and standout features.

Ready to dive deeper? Let’s break them down in the next sections.

1. Canadian Trailer Company

Canadian Trailer Company is based in Goderich, Ontario and started in 2016.

While they’re not the oldest manufacturer in Canada, they’ve built a strong local reputation fast. Their focus is simple: make trailers that work hard, last long, and handle Canadian weather.

I first came across them when helping a contractor look for a reliable enclosed trailer. We visited their site, and what stood out right away was the solid steel frame and clean welds. Nothing fancy—just strong builds that looked ready to haul.

They offer both steel and aluminum trailers, which gives you options depending on your budget and hauling needs.

Product Lineup

• Steel Cargo Trailers: Strong and affordable—great for short hauls and rough work conditions.
• Aluminum Cargo Trailers: Lighter and rust-free—better for long-term use with lower maintenance.
• Single Axle Trailers: Good for small loads and easier to tow with basic vehicles.
• Tandem Axle Trailers: Made for heavier jobs and better balance during long hauls.
• Sizes: Options from 5’x8’ to 7’x14’, giving flexibility depending on what you move.
• Customization Options: Add features like shelves, side doors, tie-downs, or ramps based on your specific needs.

Technological Innovations

• Seam-Sealed Edges: Helps stop water and dust from getting inside the trailer.
• Steel Tubing Frames: Makes the trailer stronger and more durable for rough roads.
• Electric Brakes: Gives you better control and safer stops, especially when loaded.
• LED Lighting: Brighter and lasts longer than traditional bulbs.
• Weather-Proof Flooring: Holds up against water, mud, and heavy foot traffic.

Contact Information

• Address: Goderich, Ontario, Canada

Takeaway Note

Canadian Trailer Company is a solid option if you want simple, hard-working trailers built with strength in mind. They stand out for their sturdy frames, customizable features, and Canadian-made quality. I’ve seen their trailers in action on job sites where weather and wear are nonstop—and they hold up well.

However, since they’re still growing, they may not have as many advanced options or model sizes compared to bigger suppliers.

2. Ideal Cargo

Ideal Cargo was founded in 1999 and is based in Saint-Valère, Quebec. They’ve become one of the top enclosed trailer manufacturers in Eastern Canada.

What sets them apart is their use of galvanized dipped steel frames. This means the steel is coated in zinc, which helps protect it from rust and road salt—a big deal if you’re hauling in rough weather.

They also back their trailers with strong warranties:

• Lifetime against corrosion
• 10 years for structure
• 5 years for general wear

That kind of support tells you they believe in what they build. When I visited a local dealer near Montreal, they showed me a demo trailer that had been used year-round. The floor was clean, the frame solid, and the doors still shut like new.

Product Lineup

• Enclosed Cargo Trailers: Great for protecting cargo from rain, snow, or theft.
• Sport Trailers: Built for hauling ATVs, snowmobiles, and other power sports equipment.
• Work Trailers: Designed with pros in mind—perfect for storing and organizing tools.
• Custom-Built Models: You can customize interior layout, doors, tie-downs, floors, vents, and more.

Their strength lies in enclosed models, and they build around 800 trailers a year.

Technological Innovations

• Galvanized Dipped Frames: Protects the trailer frame from rust and corrosion, extending life in salty or wet environments.
• GreenEdge Technology: Uses over 6,500 recycled plastic bottles per trailer to reduce waste and cut emissions.
• 3D Custom Trailer Builder: Lets you design your trailer online and see exactly what it’ll look like.

Contact Information

• Address: 2245 Route 161, Saint-Valère, QC, G0P 1M0
• Phone: 819-353-3350
• Email: [email protected]

Takeaway Note

Ideal Cargo is a smart pick if you’re looking for long-lasting enclosed trailers made for Canadian weather. Their build quality is proven, their warranties are strong, and the customization options are one of the best I’ve seen.

That said, Ideal Cargo doesn’t offer open trailers or deckover models. If you need something outside the enclosed category, you might need to look elsewhere.

3. Canada Trailers

Canada Trailers was founded in 1997 and is based in Mount Elgin, Ontario. They’ve been building trailers for over 25 years, focusing on heavy-duty performance, consistent build quality, and national reach.

What makes Canada Trailers different is their wide product selection. Whether you’re hauling materials for construction, towing equipment, or need a flat deck for general use—they probably have a trailer that fits.

I’ve recommended them to clients who wanted a one-stop supplier—something simple but tough. One buyer told me they bought a tandem axle utility trailer back in 2010, and other than replacing a few tires, it’s still in use today.

They serve buyers across Canada with a solid dealer network, which helps when it comes to getting parts, service, or general support.

Product Lineup

• Utility Trailers: Built for everyday hauling like tools, lawn gear, or light machinery.
• Flat Deck Trailers: Used for moving lumber, pallets, and oversized materials.
• Dump Trailers: Hydraulic models made for easy unloading of gravel, soil, or waste.
• Tilt Trailers: Let you drive equipment directly onto the deck without ramps.
• Equipment Trailers: Designed for hauling skid steers, mini-excavators, and similar machines.
• Enclosed Cargo Trailers: Good for protecting goods from weather and theft.
• Gooseneck Trailers: Offers more stability and weight capacity for larger hauls.

Their catalog covers both personal and commercial applications. You can also find specialty builds depending on your industry.

Technological Innovations

• Reinforced Cross-Members: Adds extra strength under the floor for better load support.
• Dexter Axles: A trusted axle supplier that improves ride quality and durability.
• Adjustable Couplers: Lets you match different hitch heights easily without needing adapters.
• Sealed Wiring Harnesses: Protects trailer wiring from moisture and road salt.
• Heavy-Duty Powder Coating: Adds an extra layer of protection against scratches and corrosion.

Contact Information

• Address: 33356 Talbot Line, Mount Elgin, Ontario N0J 1N0
• Phone: 519-485-6110
• Email: [email protected]

Takeaway Note

Canada Trailers is a great fit if you’re looking for a wide selection and consistent strength. Their trailers are built for tough work, and with options ranging from utility to gooseneck, there’s a lot to choose from.

One thing to consider, though, is that with a large product range, the lead time on custom requests might take a bit longer. And while the trailers are tough, the designs are pretty standard—so if you’re looking for modern styling or unique features, you may want to look elsewhere.

4. Miska Trailer

Miska Trailer is located in Hamilton, Ontario and has been manufacturing trailers for over 15 years. They’ve become one of Canada’s most well-known direct-to-customer trailer builders.

Unlike other manufacturers that rely mostly on dealership networks, Miska sells many of its trailers directly from the factory. That means fewer markups, faster turnaround, and a more hands-on experience if you’re local. They also offer over 1,000 trailers in stock at any given time (source).

Product Lineup

• Utility Trailers: Great for landscapers or everyday light-duty hauling.
• Dump Trailers: Popular for roofing, renovation, and farming—built with hydraulic lift systems.
• Car Haulers: Open trailers designed for towing vehicles and large equipment.
• Deckover Trailers: Offers a wider platform with wheels underneath, not beside the deck.
• Equipment Trailers: For hauling excavators, skid steers, and similar heavy machines.
• Enclosed Cargo Trailers: Keeps tools and materials safe from weather and theft.
• Custom Trailers: You can choose axle rating, deck material, ramps, colors, and even lighting.

They offer both galvanized and powder-coated models to match your environment and budget.

Technological Innovations

• Galvanized Steel Options: Helps reduce rust and corrosion, especially in salty winter roads.
• Modular Trailer Designs: Lets you add or swap features later without needing a full rebuild.
• Tarp Systems for Dump Trailers: Built-in solutions for covering loads on the go.
• Ramp and Gate Combos: Combo gates let you switch between dumping and loading quickly.
• Adjustable Hitch Heights: Makes it easier to tow with different trucks or setups.

Contact Information

• Address: 1056 Hwy 6 North, Hamilton, ON L8N 2Z7
• Phone: 905-689-7325
• Email: [email protected]

Takeaway Note

Miska is a strong pick if you value face-to-face service and want the flexibility to buy factory-direct. They give you a lot of trailer for your money, especially if you’re local to Ontario.

That said, the showroom-and-factory-in-one model may not work for everyone. If you’re outside Ontario or prefer shopping through local dealers, your options might be more limited. Also, while their builds are strong, they lean more toward workhorse function than premium finish.

5. Millroad Manufacturing

Millroad Manufacturing was established in 2004 and is based in Brucefield, Ontario. They specialize in custom aluminum trailers and have built a reputation for producing lightweight, long-lasting equipment that can handle serious work without the extra weight of steel.

Their trailers are popular in industries like landscaping, farming, and delivery. What makes them stand out is their 5-year structural warranty and their ability to build to order without losing focus on quality.

Product Lineup

• Flat Deck Trailers: Great for hauling lumber, pallets, or machinery—open and easy to load from the sides.
• Tilt Deck Trailers: Makes loading equipment smoother without using ramps.
• Dump Trailers: Hydraulic trailers built for clean unloading of soil, gravel, or debris.
• Deckover Trailers: Provides a wider load surface by raising the deck over the wheels.
• Gooseneck Trailers: Offers better weight distribution for heavy hauling.
• Custom Trailers: Everything from axle rating to fender style and LED lights can be custom-selected.

Millroad focuses on aluminum for all models, helping reduce trailer weight and improve fuel efficiency.

Technological Innovations

• All-Aluminum Construction: Makes the trailers lighter, rust-resistant, and easier to tow long-term.
• Integrated Tie-Down Tracks: Allows for flexible cargo securing with adjustable anchor points.
• Tongue Jack with Drop Leg: Simplifies hookup and leveling when parked or loading.
• Built-In Battery Boxes (for dump models): Keeps power systems protected and easy to access.

Contact Information

• Address: 38128 Zurich-Hensall Road, Brucefield, ON N0M 1J0
• Phone: 519-233-7722
• Email: [email protected]

Takeaway Note

Millroad is an ideal choice if you want a strong, rust-free trailer that’s lighter to haul and built for the long haul. Their aluminum builds are smart for anyone hauling on highways or in areas with tough winters.

On the downside, aluminum trailers tend to cost more up front. And if you’re using your trailer in rocky or high-impact conditions, you might find that aluminum dents easier than steel.

6. Kerr Trailers

Kerr Trailers was founded in 1992 and is based in Cookshire, Quebec. With over 30 years in business, they’ve earned a reputation for rugged, no-nonsense trailers—especially their steel flatbeds, which are built for light- and medium-duty trucks.

Their trailers are 100% made in Canada, and the company proudly highlights its tight control over every step—from design to delivery. They focus on strength, utility, and practical upgrades rather than chasing after trends.

One of my clients in rural Quebec told me their Kerr flatbed had survived five winters, two deer strikes, and still pulled straight. That kind of long-term use is what makes Kerr worth a second look.

Product Lineup

• Steel Flatbed Trailers: Built for general hauling, farm use, or light construction equipment.
• Gooseneck Flatbeds: Stronger frames with better load distribution for larger cargo.
• Deckover Trailers: Extra deck width for wide machines or oversized pallets.
• Hydraulic Tilt Models: For easier equipment loading—no ramps required.
• Customized Builds: Add winches, toolboxes, spare tire mounts, or upgrade axle ratings.

Most trailers are built with structural steel tubing and feature commercial-grade decks, either wood or metal, depending on application.

Technological Innovations

• Integrated Headboard Design: Offers built-in protection for cargo and added rigidity for the trailer frame.
• Adjustable Stake Pockets: Makes it easier to install side panels or load supports.
• Extended Tongue Options: Helps improve weight balance and makes tight turns safer.
• Spring-Assisted Ramps: Reduces lifting effort when loading heavy machines.
• Anti-Slip Steel Decks (optional): Increases safety during wet or icy conditions.

Contact Information

• Address: 315 Route 212, Cookshire-Eaton, Quebec, J0B 1M0
• Phone: 819-875-5488
• Email: [email protected]

Takeaway Note

Kerr Trailers is a solid match if you’re working in rough terrain or need a reliable steel flatbed for daily hauling. Their strength lies in simple builds, long-lasting frames, and custom add-ons for real-world tasks.

The trade-off? Their focus is mostly on flatbeds and open trailers. If you’re after enclosed models or lightweight aluminum builds, Kerr won’t be your fit. Also, their styling leans utilitarian—not not polished or flashy.

7. Excalibur Trailers

Excalibur Trailers is based in Cookstown, Ontario, and is known for its fully welded, hot-dip galvanized trailers. That galvanization process means the steel frame is dipped in molten zinc, helping it resist rust better than regular painted frames—especially useful if you’re driving on salted roads or near coastal areas.

They manufacture and distribute a wide range of trailers, including cargo, boat, snowmobile, car haulers, and more. What sets them apart is their commitment to long-term durability and ease of maintenance.

Product Lineup

• Boat Trailers: Designed for different hull types with adjustable bunks and winch stands.
• Cargo Trailers: Enclosed models that keep your gear protected from road debris and weather.
• Utility Trailers: Open-bed trailers ideal for ATVs, lawn equipment, or small machinery.
• Snowmobile Trailers: Built to handle winter wear and tear, with smoother loading ramps.
• Car Haulers: Strong frames with built-in ramps for transporting vehicles securely.
• Pontoon Trailers: Custom-fitted for large pontoon boats with reinforced center rails.
• ATV and Equipment Trailers: Heavy-duty builds for off-road gear or work machines.

Each trailer is fully welded, not bolted, which reduces weak points and the chance of frame failure over time.

Technological Innovations

• Hot-Dip Galvanized Finish: Extends trailer lifespan by preventing rust and flaking.
• Fully Welded Frames: Improves structural strength and reduces maintenance needs.
• Adjustable Bunks and Supports (boat trailers): Allows a better fit for different hull shapes.
• Integrated Lighting Systems: LED lights that are sealed against moisture and damage.
• Torsion Axle Options: Available for smoother rides and reduced bounce on uneven roads.

Contact Information

• Address: 3665 Hwy 89, Cookstown, ON L0L 1L0
• Phone: 705-458-9359
• Email: [email protected]

Takeaway Note

Excalibur is a great fit if you care about long-term durability, especially in wet, snowy, or salty conditions. Their hot-dip galvanized trailers are built to last—and that’s not just talk.

The downside? Their trailers lean more toward function than flash. If you’re looking for polished interiors or sleek aluminum styles, this isn’t the manufacturer for you.

Struggling To Find The Right Manufacturer in Canada?

You’ve done the research. Compared the top Canadian manufacturers. Still no perfect fit?

Maybe it’s not the quality—maybe it’s the specs or flexibility.

If Canadian options are falling short, it’s worth exploring overseas.

That’s where Rhinotrail steps in. We’re a China-based trailer manufacturer working with businesses around the world.

Why do customers work with us?

• More trailer size options
• Greater control over features
• Smarter cost-per-unit in bulk
• Faster turnaround on custom orders

We’re not a replacement for local builders—but we are a reliable backup when Canada doesn’t meet the mark.

Sometimes looking further gives you exactly what you need.

Contact us today for more information!

Conclusion

Choosing the right trailer builder isn’t easy.

You’ve just explored 7 Canadian manufacturers, each with a different strength. Some are built for speed. Others for power. But not all fit every need.

And that’s okay.

If none of them feel right, you don’t have to stop here.

At Rhinotrail, we’re based in China but trusted globally. Custom-built trailers. Reliable shipping. Real support.

Contact us today—we’ll walk you through your options!