Description
The SINOTRUK HOWO 6×4 mixer truck is designed for efficient concrete mixing and transport. Built with a heavy-duty chassis and high-performance mixing components, it is widely used in construction projects, ready-mix operations, and infrastructure development.
Main Structure and Components:
The mixer truck integrates a truck chassis with a specialized mixing system, including:
- Power take-off (PTO)
- Mixing drum with front/rear support brackets
- Hydraulic system (variable pump and motor)
- Reducer and control panel
- Cleaning system
The power take-off draws energy from the engine and transmits it through a hydraulic circuit, driving the drum to mix and discharge concrete efficiently.
Drive Options:
- Available in Left-Hand Drive and Right-Hand Drive models to meet different market regulations.
- Suited for hilly terrain, urban sites, or long-distance haulage.
Best-Selling Market:
This model is in high demand in Rwanda, known for its reliable performance and low maintenance cost across construction fleets.
Maintenance Tips for Long-Term Use:
- Universal Joint Lubrication: Regularly apply grease to the rotating shaft to prevent early wear. Keep spare joints for quick replacement in case of failure.
- Hydraulic Oil Cleanliness: Prevent dirt and sand from contaminating the system. Replace oil regularly as per manual. If water or sediment is found, stop operation and clean the entire hydraulic system immediately.
- Cooling System Check: Clean the hydraulic oil radiator often and confirm that the fan operates correctly to avoid overheating issues.
Technical Specifications:
| Vehicle Brand | Sinotruk |
| Mixing Volume | 7–8 m³ |
| Steering | ZF8118 |
| Total Mass | 15,900 kg |
| Number of Axles | 2 |
| Wheelbase | 3950 mm |
| Tire | Vacuum Tire |
| Working Pressure | 0.2 MPa |
| Test Pressure | 0.3 MPa |
| Fuel Tank | 400 L |
